Grazier System

An Entirely New Concept in
Highly Portable & Modular Electric Fence Systems.

How The Grazier System portable electric fence works.

There are no tools or helpers needed to set up or take down your Grazier System!

Step 1

Locate and Step In the Winch Corner
and any Standard Corners necessary for your intended fence. On very dry and hard soil, design of the steel spikes permit use of a small mallet for easy setting.

Step 3

Grasp the Plastic Handle and Walk
the fence line into position. If making an enclosure or turning corners, let the ropes slide around the outside of each corner, not yet placed into the hangers.

Attach Plastic Handle to End Point.
If making a standalone enclosure, the end point will be the winch itself. This handle, wherever it is hooked, will create your gate opening.

Step 4

Locate and Step in Line Posts.
On very dry and hard soils, pull upward on the post while stepping in with your foot to stabilize the post. If necessary, tap in very lightly with a small mallet.

Step 5

Insert Line Material into Hangers.
The fence line slips easily into adjustable hangers on each corner and line post.

Step 6

Tighten the Fence Line.
At the winch, grasp the fence material and pull it toward you, tightening the entire fence length. Do not tighten excessively.

Step 4

Secure Line Material to Winch.
With fence material tightened, make three or four quick wraps of each line around any of the clasp rings. Excess line remains on reel; the reel is not used for tightening.

Step 5

The Grazier System fence will work with any fence energizer. Use a jumper wire to connect to an existing electric fence. For portability, our 2 D-cell charger is an excellent option.

Step 6

To help ensure your success, watch our video on how to introduce your horse to the Grazier System.