Grazier System

An Entirely New Concept in
Highly Portable & Modular Electric Fence Systems.

Used in this example

  • 1 Winch Corner loaded with 1/4-in ElectroBraid, 150' x 2-strand or
    1/8-in ElectroBraid, 500' x 2-strand
  • 4 to 16 Line Posts
  • 1 jumper wire

Price components used.

Dividing a Pasture with The Grazier System electric fence.

Divide a Pasture

In this picture the permanent fence is made of steel wire and is hard to see, but this winch corner is backed up against one of the line posts of that fence, which runs perpendicular to the white Grazier System fence.

Intensive (daily) rotational grazing pasture management is what The Grazier System was originally designed for. Within an established paddock system, moving a Grazier System lead or back fence requires less than ten minutes.

Either the original 1/4" ElectroBraid 150-foot fence or our unique 1/8" ElectroBraid 500-foot fence can be used. Line posts can be spaced from 30 to 60 feet apart. Normally the Grazier System handle would attach to an existing fence line; however, one Grazier System Standard Corner can be used as an end point, if necessary. If the existing fences are electric, use a jumper wire to the Grazier System; if they are not not, our 2 D-cell charger or any other electric fence energizer can be used.